“Quantum Dot” Lighting Technology Takes Forward Leap

April 17, 2018

Steve Lundeberg

A “superacid” much stronger than automobile battery acid has enabled a key advance toward a new generation of LED lighting that’s safer, less expensive and more user friendly.

Researchers at Oregon State University used the organic superacid to improve the performance of “quantum dots” made from copper indium disulfide, a compound much less toxic than the lead or cadmium that typically serve as the basis for the light-emitting nanocrystals.

Used in optics and electronics, quantum dots have been around for some time. But they can be expensive to manufacture as well as unsafe for some potential applications, including biomedical imaging, because of lead and cadmium’s toxicity.

“There are a variety of products and technologies that quantum dots can be applied to, but for mass consumer use, possibly the most important is improved LED lighting,” says Greg Herman, professor of chemical engineering in the OSU College of Engineering. “And there are now light-emitting nanocrystal TVs on the market that use quantum dots.”

Manufacturing techniques being developed at Oregon State are dealing with the toxicity issue and should scale up to large volumes for low-cost commercial applications. They also will provide new ways to offer the precision needed for better colour control; the size and composition of the particle is what determines the colour of the light.

In this latest study, published in Materials Letters,* researchers created a superacid treatment that improves the photoluminescence of the non-toxic, non-heavy metal quantum dots to the point of being comparable with the best-performing quantum dot material, cadmium selenide.

“The light emission from the superacid-treated dots is much better,” says Herman, the study’s corresponding author. “There are still issues that need to be addressed, but what we’ve shown with this is the ability to improve the lifetime of the quantum dots, and much higher quantum efficiencies. And because these quantum dots are non-toxic, the potential exists for biomedical applications as well.”

A cancer patient, for example, could ingest highly stable dots that would collect at tumour sites to allow imaging.

“That’s another reason we’re working with copper and indium,” he said. “You don’t want people to ingest cadmium or lead.”

The National Science Foundation and Sharp Laboratories of America supported this research. Collaborators included then-OSU graduate students Yagenetfere Alemu and Gustavo Albuquerque.

Earlier quantum dot advances at Oregon State involved the development of a “continuous flow” chemical reactor, as well as microwave heating technology that’s conceptually similar to the ovens owned by most U.S. households.

The continuous flow system is fast and energy efficient and will cut manufacturing costs. And the microwave technology allows for precise control of the heat needed during the manufacturing process, translating into nanoparticles that are the size, shape and composition they need to be.

Steve Lundeberg reports on science news for Oregon State University. This article was first published online by OSU: http://today.oregonstate.edu/news/‘quantum-dot’-lighting-technology-takes-forward-leap-thanks-new-superacid-treatment

Photo source: Wikipedia; https://en.wikipedia.org/wiki/Quantum_dot_display

* Yagenetfere A. Alemu, Gustavo H. Albuquerque, Gregory S.Herman, “Enhanced photoluminescence from CuInS2/ZnS quantum dots: Organic superacid passivation,” Materials Letters, Volume 219, 15 May 2018, Pages 178-181, www.sciencedirect.com/science/article/pii/S0167577X18303173

Related Articles


Changing Scene

  • Contact Delage Announces New Partnership with Zilux

    Contact Delage: New Representation Agreement – Zilux

    Contact Delage is pleased to announce a new partnership with Zilux for the representation of their products in the regions of Montreal, Laval, Estrie, Lanaudière, Laurentides, and Montérégie. Specializing in the design of aluminum lighting and urban furniture, Zilux, a Quebec-based manufacturer, combines innovation and durability to enhance your outdoor design projects. Their expertise in… Read More…

  • Mac’s II Agencies Announces Jamie Capell as the New Sales Manager for Lighting Specification

    Expanding Expertise: Mac’s II Agencies Strengthens Lighting Division

    Mac’s II Agencies is pleased to announce the expansion of its lighting division with the addition of Jamie Capell as the Sales Manager for Lighting Specification. Jamie brings 25 years of experience in the lighting and electrical industry, most notably serving as the Director of Sales for a local lighting agency in British Columbia. With… Read More…


Design

  • Light ARchitect Is Revolutionizing Lighting Design for Architects & Designers

    Light ARchitect Is Revolutionizing Lighting Design for Architects & Designers

    Traditionally, lighting design could be a tedious process, often involving physical mockups, time-consuming calculations, and static renderings using multiple software tools. With advancing technology, these traditional methods are giving way to more sophisticated tools that enhance precision, speed, and visualization. On the downside, many of the new tools are not particularly intuitive and the learning… Read More…

  • Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    August 6, 2024 Built in 1980, the building that houses Sainte-Thérèse high school, in Quebec Canada, was looking a little worse for the wear. Renovation work began with two major projects: introducing a multidisciplinary sports centre, as well as redesigning the parking lots.  The employee and visitor parking lots were completely reconfigured during phase 1… Read More…


New Products

  • Magic Lite: New 5-Channel High-Performance LED Amplifier

    Magic Lite: New 5-Channel High-Performance LED Amplifier

    Designed for professional-grade LED systems, the 5-Channel High-Performance Amplifier delivers precision, scalability, and reliability. Using advanced MOSFET technology and high-speed 10Mbps optical couplers, this amplifier ensures robust power output and flawless signal transmission across large-scale, synchronized LED applications. Whether expanding capacity for PWM controllers or enhancing system stability, this amplifier simplifies complex lighting designs while… Read More…

  • Eureka: Lattice – 3D Printed Ceiling Suspended Fixture

    Eureka: Lattice – 3D Printed Ceiling Suspended Fixture

    Lattice is a one-of-a-kind 3D metal printed fixture. Layer upon layer of intricately braided aluminum branches meld into one of three comprehensive shapes. The result is a stunning glowing light fixture that will add a luxurious feel to ambient environments. EXCLUSIVELY AVAILABLE ON DEMAND. Read More…