Philips SceneSwitch
![SceneSwitch](https://www.lightingdesignandspecification.ca/wp-content/uploads/2017/08/LDS-P-Philips-Switch-400.jpg)
August 1, 2017
With a Philips SceneSwitch LED bulb, you can easily change the setting from a bright light, to a natural light, to a cozy warm glow. No dimmer or additional installation is required.
Three light settings
This allows you to switch from functional lighting to natural light and to a cosy warm glow.
![3 steps WarmGlow dimming](https://www.philips.ca/c-dam/b2c/Philips-consumer-lighting/topic_pages/global/sceneswitch/3_steps_warm_glow_dimming_icons.png)
Simply plug and play
No dimmer or additional installation needed.
Works with your existing light switch on the wall.
![Simply plug and play](https://www.philips.ca/c-dam/b2c/Philips-consumer-lighting/topic_pages/global/sceneswitch/faq_simply_plus_play_icons.png)
Auto Memory –built-in memory chip
The lamp can memorise your last setting automatically if the switch is turned off for longer than 6 seconds.
![Auto memory](https://www.philips.ca/c-dam/b2c/Philips-consumer-lighting/topic_pages/global/sceneswitch/faq_auto_memory.png)
RESET – Multiple lamp synchronisation
If multiple lamps are used and they are no longer synchronised, simply toggle the switch (turn it on and off again within 1 second) to restore the lamps to the default factory setting.
![Reset - Multiple lamps](https://www.philips.ca/c-dam/b2c/Philips-consumer-lighting/topic_pages/global/sceneswitch/faq_reset.png)
Non dimmable
This lamp is not suitable for use with dimmers.
If used on a dimmer please set the dimmer setting to 100% brightness
For more information: