New CSA Test Method for Horticultural LEDs

May 17, 2018

CSA Group

Many farmers are making the switch from traditional farms to commercial greenhouses and vertical farms because they produce better yields, help address natural resource constraints, and offer shelter from unfavourable weather and climate change. But greenhouses especially consume a lot of electricity, which is costly. LEDs — with long lifespans and energy-efficient properties — help mitigate these costs. That’s why the horticultural LED market is expected grow 22% annually until 2020.*

Due to the corrosive environment inside these farms, horticultural LEDs must be tested more rigorously and meet additional requirements that don’t apply to general-purpose LEDs. But there are limitations to current testing methods, including:

  • repeatability due to DUT (device-under-test) active cooling
  • exposure to high heat and humidity
  • small typical sphere ports
  • inflated results produced by typical testing instruments
  • missing performance characteristics due to spatial colour non-uniformities
  • limiting horticultural LEDs to being measured on moving mirror Type C-goniometers
  • data application issues when taking far-field measurements for near-field applications

New test method a potential game-changer

CSA Group looked at whether .ies file projections could be applied to near-field applications by using .ies file interpreting software to model the output on near-field planes, and measure on the same near-field planes. After analyzing the results, CSA Group determined that this approach, called near-field planar scanning, overcame many of the previous testing limitations.

The new approach has eliminated DUT size limitations because the device does not have to be enclosed. Limitations associated with active cooling are also no longer a concern because the orientation of the DUT is completely static throughout the test, and it can be tested in a wide open volume with easy access to remote cooling devices. And finally, near-field colour non-uniformities can be captured because the DUT is measured in the near-field instead of the far-field where the colours are well mixed.

CSA Group is working to standardize this method through its involvement in committees and working groups under ASABE (American Society of Agricultural and Biological Engineers) and IES (Illuminating Engineering Society of North America). It would give end users the benefit of having apples-to-apples comparisons between prospective products. Lighting designers would also be able to use existing design software to accurately model the photon flux density at the canopy when the light sources are applied at near-field distances.

Download the full white paper to learn more about this innovative testing method: www.csagroup.org/article/growing-opportunities-led-manufacturers-horticultural-market/?utm_source=Kerwill&utm_medium=referral&utm_campaign=LED.

Photo source: Philips Lighting

* Technavio, Global LED Lighting Market for Horticultural Application 2016-2020, Oct. 2016

Related Articles


Changing Scene

  • Salex: Shining a Light on Canadian Brands

    Salex: Shining a Light on Canadian Brands

    Salex Is Proud to Represent a Range of Outstanding Canadian Lighting Manufacturers. These brands not only offer high-quality and cutting-edge solutions but also contribute to the growth of our national industry. Some of Salex’s featured Canadian partners include: Read More…

  • Signify Logo

    Signify Proposes to Re-Appoint Gerard Van de Aast to the Supervisory Board 2025

    Signify proposed on January 24, 2025, the re-appointment of Mr. Gerard van de Aast as a member of the Supervisory Board to the Annual General Meeting of Shareholders (AGM) to be held on April 25, 2025. Gerard van de Aast has been a member of the Supervisory Board since 2017 and was appointed Chair of… Read More…


Design

  • Light ARchitect Is Revolutionizing Lighting Design for Architects & Designers

    Light ARchitect Is Revolutionizing Lighting Design for Architects & Designers

    February 7, 2025 Light ARchitect Is Revolutionizing Lighting Design for Architects & Designers Traditionally, lighting design could be a tedious process, often involving physical mockups, time-consuming calculations, and static renderings using multiple software tools. With advancing technology, these traditional methods are giving way to more sophisticated tools that enhance precision, speed, and visualization. On the… Read More…

  • Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    August 6, 2024 Built in 1980, the building that houses Sainte-Thérèse high school, in Quebec Canada, was looking a little worse for the wear. Renovation work began with two major projects: introducing a multidisciplinary sports centre, as well as redesigning the parking lots.  The employee and visitor parking lots were completely reconfigured during phase 1… Read More…


New Products

  • Magic Lite: 8 Zone RGB+CCT Wall Panel Remote 

    Magic Lite: 8 Zone RGB+CCT Wall Panel Remote 

    The Magic Lite 8-Zone RGB+CCT Wall Panel Remote offers reliable wireless control for multi-zone LED lighting systems. Designed with a high-precision capacitive touch IC and utilizing 2.4GHz RF wireless technology, it provides smooth and responsive adjustments for up to 8 lighting zones. Control 16 million colours, fine-tune saturation, colour temperature, and brightness, all from a… Read More…

  • GVA: HL-GEN4 COLOR CHANGING LED SERIES

    GVA: HL-GEN4 COLOR CHANGING LED SERIES

    HL-GEN4 COLOR CHANGING is the fourth generation of modular direct view or accent architectural lighting system in the HL product series. Built on the award-winning COLOR-STREAM platform, HL-GEN4 COLOR CHANGING is capable of communication speeds up to 16 times faster than DMX and liquid-smooth dimming. Our proprietary INFINITY technology is seamlessly incorporated, enabling the delivery… Read More…