Use of Night Lighting Continues to Grow

December 11, 2017

From 2012 to 2016, Earth’s artificially lit outdoor area grew by 2.2% per year, with a total radiance growth of 1.8% per year, reports an article published in the journal Science Advances. Continuously lit areas brightened at a rate of 2.2% per year. Researchers observed large differences in national growth rates, with lighting remaining stable or decreasing in only a few countries. These data are not consistent with global scale energy reductions, indicating instead greater light pollution, with negative consequences for flora, fauna, and human well-being.

Historically, increases in luminous efficacy have led to greater light use rather than energy savings, notes the article. A critical question for sustainable development is whether the use of outdoor light will continue to grow exponentially or whether developed countries are nearing saturation in demand.

The researchers question whether, if demand saturation has not been reached, the increasing luminous efficacy made possible by the solid-state lighting revolution (12) will increase light emissions instead of saving energy.

The research was conducted using data from Visible Infrared Imaging Radiometer Suite Day-Night Band (VIIRS DNB), which came online just as outdoor use of LED lighting began in earnest. This sensor provides the first-ever global calibrated nighttime radiance measurements in a spectral band of 500 to 900 nm, which is close to the visible band, with a much higher radiometric sensitivity than previous methods. This improved spatial resolution allows for neighbourhood (rather than city or national) scale changes in lighting to be investigated .

Results

The data show that over the period of 2012-2016, both lit area and the radiance of previously lit areas increased in most countries in the 500–900-nm range, with global increases of 2.2% per year for lit area and 2.2% per year for the brightness of continuously lit areas. These factors decreased in very few countries.

Many large cities had decreases in DNB radiance in the city centre but increases in outlying areas. These decreases can often be directly attributed to replacement of older lamps with LEDs. This is vividly demonstrated by photographs of Milan, Italy, taken by astronauts on the International Space Station in 2012 and 2015. The streetlights in the city changed from yellow/orange (sodium vapour) to white (LED), whereas the surrounding areas remained yellow/orange. As a result, the radiance observed by the DNB decreased because of the sensor’s lack of sensitivity to light in the range of 400 to 500 nm

Discussion

Two major arguments for changing to LEDs for outdoor lighting are cost savings and reductions in energy consumption. These goals have been realized in many cities, so decreases in observed DNB radiance likely indicate local energy savings. However, on a global and often national scale, these local decreases are outweighed by increases in radiance in other areas, most likely because of additional lighting being installed. The “energy saving” effects of outdoor LED lighting for country-level energy budgets are therefore smaller than might be expected from the increase in luminous efficacy compared to older lamps

Large differences in per capita light use compared to per capita GDP suggest that in brightly lit countries, major decreases in energy consumption for outdoor lighting could potentially be achieved through reduced light use.

In the near term, it appears that artificial light emission into the environment will continue to increase, further eroding Earth’s remaining land area that experiences natural day-night light cycles. This is concerning, because artificial light is an environmental pollutant. In addition to threatening the 30% of vertebrates and more than 60% of invertebrates that are nocturnal, outdoor artificial light also affects plants and microorganisms, and is increasingly suspected of affecting human health. In the longer term, perhaps the demand for dark skies and unlit bedrooms will begin to outweigh the demand for light in wealthy countries

Read the study here: http://advances.sciencemag.org/content/3/11/e1701528.full

Related Articles


Changing Scene

  • Magic Lite Announces New Partnership with Prolux Lighting - Representation

    Magic Lite Announces New Partnership with Prolux Lighting

    Magic Lite is thrilled to officially join forces with the amazing team at Prolux Lighting & Controls with a new representation agreement! Thank you for the warm welcome! The Magic Lite team is excited to be part of Prolux’s strong lineup of trusted lighting brands. From kitchens to commercial projects, Magic Lite can’t wait to… Read More…

  • SLS Group Industries Announces New Partnership with JDRF Electromag

    SLS Group Industries Announces New Partnership with JDRF Electromag

    SLS Group Industries are proud to represent JDRF Electromag. Discover Autonomy Lighting, the world’s first self-commissioning Lighting Control System. JDRF Electromag’s self-commissioning smart lighting system uses machine-learning to eliminate all manual design, setup, and maintenance and removes all human involvement before, during, and after installation of the luminaire. Upon power-up, devices automatically build a secure… Read More…


Design

  • Zaneen: Current Design Trends

    Zaneen: Current Design Trends

    Refresh yours or your client’s space with a collection of inspiring top design trends, and the luminaires to suit them! From the use of minimalist palettes to highlighting natural materials, keep reading to discover the last few current style trends. Reduce, reuse, recycle. The ECO CHIC design trend is all about sustainability and minimizing unnecessary consumerism. Selecting… Read More…

  • Artika: Home Lighting – Mastering Mood Lighting with CCT Lights

    Artika: Home Lighting – Mastering Mood Lighting with CCT Lights

    Correlated color temperature lights (CCT Lights) are a type of lighting that provides various color temperatures. These impressive lights can mimic the natural variations of daylight. They are also measured in Kelvin (K), which influences the warmth or coolness of the light emitted by a source. Setting the right tone in your home can be… Read More…


New Products

  • SATCO|NUVO: Silver & Gold Crown LED Lamps

    SATCO|NUVO: Silver & Gold Crown LED Lamps

    SATCO|NUVO’s Silver and Gold Crown LED lamps offer vintage-inspired elegance with modern performance. Available in A19, G25, and G40 shapes, these decorative bulbs feature a striking half-bowl silver or gold finish that redirects light back into the bulb, producing a soft, ambient glow while reducing harsh downward illumination. Perfect for restaurants, hotels, and stylish residential… Read More…

  • Acuity: SensorSwitch – CMS SSA Wireless Ceiling Mount Sensor

    Acuity: SensorSwitch – CMS SSA Wireless Ceiling Mount Sensor

    The newest addition to the wireless SensorSwitch AIR product line is the CMS SSA Wireless Ceiling Mount Sensor. This sensor is field-installable and the ideal choice for both retrofit and new construction projects in indoor commercial spaces. Powered by the PP5 SSA Power Pack (sold separately) it offers a simple solution for adding dimming capabilities to existing luminaires. Designed to work primarily with 0-10V sink luminaires, this sensor is a versatile addition to your… Read More…