|

The Changing Face of LightFair

LDS Lightfair 2020 logo 400

July 13, 2022

By Linda Longo

The lighting industry has undergone a lot of change over the past 25 years, and LightFair has served as a bellwether of its future direction. LightFair 2022 was no exception. This is the year of the mobile app, and almost every exhibitor was on board with controlling their products from pressing an app on a smartphone. But first, let’s discuss LightFair’s role in propelling new technology forward — and some industry missteps along the way.   

Exciting Times

In the 1990s, exhibitors focused on the nationwide change-over to compact fluorescent technology, spurred on by energy legislation and utility rebates. But there were challenges with the CFL, such as dimming difficulties and failures/slow starts in extreme temperatures. The commercial sector accepted CFLs readily enough thanks to financial incentives, but the “ugly” CFL shape never won over the residential market. Each LightFair brought forth new designs to make CFLs more visually palatable to a consumer audience.

The Challenges

Then there were the years when fiber optic lighting took over the show floor, where even retired Major League Baseball’s New York Yankees outfielder Dave Winfield invested in a fiber optic lighting company and made a personal appearance at LightFair signing autographs and posing for photos. Fiber optic lighting’s prevalence at LightFair quickly gave way to a rapid consolidation of manufacturers. Among the caveats, the light source needed to be located remotely (typically in a closet) yet close enough for the fiber optic to be accessible, which limited its convenience. There was also a noticeable drop off in light quality in installations requiring longer runs. Soon, the technology petered out in significance and became more of a niche category (accent lighting in pools, etc.).

Next up, LED, which eventually morphed from a narrow category of power indicator switches on appliances and traffic lights into a mainstream ambient light source. This was a slow transition and every subsequent LightFair brought new developments in LED size, shape, energy efficiency, heat dissipation, and later warm dimming and color-changing ability and tunable white. But along the way, some promising technology went bust – for example, Switch Lightbulb received a lot of publicity during LightFair 2012 for its unique liquid-cooled LED A-lamps (which made them quite heavy) and the Stack Lighting system, which won a LightFair Innovation Award in 2016, was considered to be the most consumer-friendly. Less than five years later, both companies were out of business. Toshiba Lighting was a mainstay for many LightFairs and even did a fair amount of residential business with lighting showrooms and electric supply houses before the parent company decided to pull out of the North American market entirely.showfloor 3

The Conundrum

During these exciting years of lighting innovations, you would find lighting showroom owners, electrical distributors, lighting designers and specifiers, military representatives, and even architects and designers from the hospitality community visiting LightFair to peruse the latest developments.

Most technologies experience a plateau, and when the LED market matured, those revolutionary breakthroughs were occurring less often as product development takes time. Citing the long cycle of product development and feature refinement, quite a few manufacturer exhibitors back then wondered if it would be better to take a cue from Germany’s Light+Building international show, which is held on alternating years. They told me they felt pressured to produce something extraordinary, and if they didn’t have it, they had to weigh the cost of booth space against showing older product from the previous year. For some, it was more important to have a presence at LightFair than be absent.

Thanks to COVID-19 and the resulting pandemic, manufacturers who wanted more time between shows got exactly that. Unfortunately, not everyone was able to take advantage of the time lag to make strides in development due to quarantines, component parts shortages, and other constraints.

ShowfloorCrestronWhat Happened This Year

Flash-forward to 2022, and in-person trade shows are coming back. LightFair was held in June on one floor of the newly constructed West Hall of the Las Vegas Convention Center instead of its past renditions in the North and South Halls. LightFair officials were pleased with attendance, which was higher than anticipated. Not helping matters were the high costs of airplane travel and gas, hindering any last-minute attendance from Californians who had hoped to drive to Las Vegas affordably.  

There was plenty of innovation on the show floor — especially if you are a fan of mobile apps to control smart lighting systems from phones and tablets. The majority of exhibitors added the convenience of app control, with Bluetooth Mesh being the protocol of choice for most. And while every booth seemed to offer an app control for their products, there were a few attendees who grumbled that it meant yet another app to download on an already crowded phone or tablet. Are we entering an era where there are too many different apps needed to operate various building systems quickly and conveniently? Will there be a shake-out in the controls arena where one protocol or one universal app is adapted by manufacturers for inter-operability?

ShowfloorLedvance

Just like Light+Building in Germany, LightFair is not an order-writing show but more of an exposition of lighting development and possibilities. Therefore, success is harder for exhibitors to quantify. We’ll have to wait until next year’s show to find out if these ubiquitous mobile apps continue their momentum. LightFair 2023 takes place at the Javits Convention Center in New York City May 23-25 (trade show) and May 21-23 (conference).

Related Articles


Changing Scene

  • CSC LED Announces the Appointment of Patrick Ndlovu as Branch Manager (AB)

    CSC LED is happy to announce that Patrick Ndlovu has joined their growing team as Branch Manager in Calgary, Alberta. With extensive experience as a journeyman electrician and a strong background in sales, Patrick brings together technical expertise and a deep understanding of market dynamics. His practical experience in the field, combined with his sales… Read More…

  • Maxlite Expands c-Max Network Partners Ecosystem With Casambi Technologies

    MaxLite is pleased to announce the recent expansion of its c-Max Network Partners ecosystem with the addition of Casambi Technologies, a provider of wireless lighting control systems. This strategic partnership further enhances MaxLite’s c-Max Lighting Controls platform, offering customers an even wider range of advanced wireless control options. The collaboration with Casambi strengthens MaxLite’s commitment… Read More…


Design

  • Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    Project Story: Sainte-Thérèse High School Outdoor Lighting Upgrade

    August 6, 2024 Built in 1980, the building that houses Sainte-Thérèse high school, in Quebec Canada, was looking a little worse for the wear. Renovation work began with two major projects: introducing a multidisciplinary sports centre, as well as redesigning the parking lots.  The employee and visitor parking lots were completely reconfigured during phase 1… Read More…

  • Resilience Illuminated: Reviving Westminster Pier Park After Devastating Fire

    Resilience Illuminated: Reviving Westminster Pier Park After Devastating Fire

    In September 2020, the picturesque city of New Westminster near Vancouver in British Columbia suffered a devastating setback when an intentionally set fire destroyed much of the city’s waterfront park, including its urban beach, sand volleyball courts, and iconic art installation known as Wow Westminster. The fire, which burned for ten days before firefighters could… Read More…


New Products

  • SATCO|NUVO: SATCO-Escent Decorative Lamps

    SATCO|NUVO: SATCO-Escent Decorative Lamps

    Discover the elegance of “Satco-Escent” Satin Spun light bulbs, which combine the classic charm of incandescent lighting with the advantages of modern LED technology. The exquisite Satin Spun finish evokes the look of a vintage gas flame, while the unique shape of the bulb adds a touch of contemporary style. This family is available in… Read More…

  • SATCO|NUVO: LED HID Replacement Lamps

    SATCO|NUVO: LED HID Replacement Lamps

    Easily upgrade dated HID lamps with energy saving LED bulbs. SATCO’s long lasting HID replacement lamps offer outstanding efficacy in applications where low-maintenance is the goal: streetlights, warehouses, retail, gymnasiums and more. With a variety of lamp shapes and bases available in clear filament or white finish, in color temperatures from warm white to natural… Read More…